How to configure MPLS L3 VPN with OSPF ?

In MPLS Layer 3 the service provider will participate in routing with the customers. The customers will run static, OSPF, EIGRP, BGP or any other routing protocol with the service provider; these routes can be shared with other sites of the customers. In VPN routing information from one customer is completely separated from other customers and tunneled over the service provider MPLS network. we have already discus what is MPLS? how MPLS work? and What is MPLS L3 VPN ? in this section we see how to configure MPLS L3 VPN supports OSPF sites. Before we start our configuration you must familiar with these topics. what is BGP ? what is EIGRP? what is RIPv2? what is MPLS? what is MPLS LDP ? what is MPLS L3 VPN? How to configure MPLS L3 VPN with RIPv2 ? How to configure MPLS L3 VPN with EIGRP ? What we need to know before applying this configuration? we need to assign separate process ID because its required each VRF that receive VPN routes via OSPF from CE. in our topology we are running OSPF for multiple VRF and also running OSPF inside our core network. its need to distinguished which routes belong to which VRF and which interface belong to which OSPF process. in simple word use separate process ID. When its comes to redistribute OSPF into BGP by Default only OSPF inter-area and inter-area routes are redistribute into BGP. We need to use EXTERNAL key with the redistribute command under BGP to redistribute OSPF external routes into BGP. in simple words use external keyword.

In MPLS Layer 3 the service provider will participate in routing with the customers. The customers will run static, OSPF, EIGRP, BGP, or any other routing protocol with the service provider; these routes can be shared with other sites of the customers.






In VPN routing information from one customer is completely separated from other customers and tunneled over the service provider MPLS network.



we have already discussed what is MPLS? how MPLS work? and What is MPLS L3 VPN ? in this section we see how to configure MPLS L3 VPN supports OSPF sites. Before we start our configuration you must familiar with these topics.

1. Introduction of MPLS

2. What is MPLS Label distributing protocol (LDP)? How LDP works?


3. how to configure MPLS LDP Peering?


4. What is MPLS L3 VPN? How to configure?


5. How to configure MPLS L3 VPN with RIPv2?


6. How to configure MPLS L3 VPN with EIGRP?


7. How to configure MPLS L3 VPN with OSPF?


8. What are OSPF Sham Links? how to configure OSPF Sham Links?


9. How to configure MPLS L3 with BGP AS OVERRIDE?

10. What Is Network Tunneling And How To Configure Generic Routing Encapsulation (GRE) Tunnels?

11. What Is DMVPN (Dynamic Multipoint VPN), NHRP, MGRE, And How To Configure DMVPN Phase 1?

12. What Is DMVPN (Dynamic Multipoint VPN) Phase 2? How To Configure DMVPN Phase 2 Dynamic And Static Mapping?

 13. How To Configure EIGRP And OSPF Over DMVPN Phase 1 & 2?

 14. How To Configure External BGP And EIGRP On DMVPN Phase 2?

15.  What Is IPSec (Internet Protocol Security)? What Is Internet Key Exchange IKE? How To  Configure IPSec Tunnel?

16. What Is IKE (Internet Key Exchange)? How To Configure IPSec Site-To-Site?


What do we need to know before applying this configuration?

  1. we need to assign a separate process ID because it required each VRF that receives VPN routes via OSPF from CE. in our topology we are running OSPF for multiple VRF and also running OSPF inside our core network. its need to distinguished which routes belong to which VRF and which interface belong to which OSPF process. in simple word use separate process ID. 
  2. When it comes to redistributing OSPF into BGP by Default only  OSPF inter-area and inter-area routes are redistributed into BGP. We need to use the EXTERNAL key with the redistribute command under BGP  to redistribute OSPF external routes into BGP. in simple words use external keywords. 


Let see the configuration to get a better understanding:-

Topology:


Goal:
  • configure the topology as per the diagram 
  • assign the IP addresses to their interfaces
  • configure IGP (OSPF 1) inside MPLS SP core 
  • configure MPLS LDP on router 1_2_3 
  • configure labels (99-199_200-299_300-399)
  • configure VRF A-1 on router 1 and VRF A-2 on router 3
  • configure RD and RT  value 500:1 on both the sites
  • configure on router 1 assign FastEthernet facing CE under VRF A-1
  • configure on router 3 assign FastEthernet facing CE under VRF A-2
  • Configure the loopbacks with an exact mask to exchange the routes 
  • configure OSPF 1 on both CE routers  
  • configure OSPF 11 on PE router 1 under VRF A-1 and OSPF 13 on PE router 3 under VRF A-2
  • make sure PE and CE routers can ping 
  • configure VPNv4 peering between PE routers. 
  • Configure redistribution on PE routers between OSPF and BGP under VRF.
  • make sure both the  CEs routers are able to ping.


R1(config)#Interface fastethernet 0/0
R1(config-if)#Ip address 10.1.1.1   255.0.0.0
R1(config-if)#No shutdown
R1(config-if)# keepalive
R1(config-if)#Exit

R1(config)#Interface serial 4/0
R1(config-if)#Ip address  1.1.1.1 255.0.0.0
R1(config-if)#No shutdown
R1(config-if)#Exit

R1(config)#Interface serial 4/2
R1(config-if)#Ip address  3.3.3.2 255.0.0.0
R1(config-if)#No shutdown
R1(config-if)#Exit

R1(config)#Interface loopback 0
R1(config-if)#Ip address 192.168.10.1 255.255.255.0
R1(config-if)#Exit

R1(config)#Interface loopback  1
R1(config-if)#Ip address 192.168.11.1 255.255.255.0
R1(config-if)#Exit
R1(config)#Interface loopback  2
R1(config-if)#Ip address 192.168.12.1 255.255.255.0
R1(config-if)#Exit
R1(config)#Interface loopback 3
R1(config-if)#Ip address 192.168.13.1  255.255.255.0
R1(config-if)#Exit

R2(config)#Interface fastethernet 0/0
R2(config-if)#Ip address 20.1.1.1   255.0.0.0
R2(config-if)#No shutdown
R2(config-if)#keepalive
R2(config-if)#Exit




R2(config)#Interface serial 4/0
R2(config-if)#Ip address  1.1.1.2 255.0.0.0
R2(config-if)#No shutdown
R2(config-if)#Exit

R2(config)#Interface serial 4/1
R2(config-if)#Ip address  2.2.2.1 255.0.0.0
R2(config-if)#No shutdown
R2(config-if)#Exit


R2(config)#Interface loopback 0
R2(config-if)#Ip address 192.168.20.1 255.255.255.0
R2(config-if)#Exit
R2(config)#Interface loopback  1
R2(config-if)#Ip address 192.168.21.1 255.255.255.0
R2(config-if)#Exit
R2(config)#Interface loopback  2
R2(config-if)#Ip address 192.168.22.1 255.255.255.0
R2(config-if)#Exit
R2(config)#Interface loopback 3
R2(config-if)#Ip address 192.168.23.1  255.255


  
R3(config)#Interface fastethernet 0/0
R3(config-if)#Ip address 30.1.1.1   255.0.0.0
R3(config-if)#No shutdown
R3(config-if)# keepalive
R3(config-if)#Exit

R3(config)#Interface serial 4/1
R3(config-if)#Ip address  2.2.2.2 255.0.0.0
R3(config-if)#No shutdown
R3(config-if)#Exit

R3(config)#Interface serial 4/2
R3(config-if)#Ip address  3.3.3.1 255.0.0.0
R3(config-if)#No shutdown
R3(config-if)#Exit

R3(config)#Interface loopback 0
R3(config-if)#Ip address 192.168.30.1 255.255.255.0
R3(config-if)#Exit
R3(config)#
R3(config)#Interface loopback  1
R3(config-if)#Ip address 192.168.31.1 255.255.255.0
R3(config-if)#Exit
R3(config)#Interface loopback  2
R3(config-if)#Ip address 192.168.32.1 255.255.255.0
R3(config-if)#Exit
R3(config)#Interface loopback 3
R3(config-if)#Ip address 192.168.33.1  255.255.
R3(config-if)#Exit


R4(config)#interface fastEthernet 0/0
R4(config-if)#ip address 30.1.1.2 255.0.0.0
R4(config-if)#no shutdown
R4(config-if)#exit

R4(config)#interface loopback 0
R4(config-if)#ip address 192.168.40.1 255.255.255.0
R4(config-if)#exit

R5(config)#Interface fastethernet 0/0
R5(config-if)#Ip address 10.1.1.2   255.0.0.0
R5(config-if)#shutdown
R5(config-if)#Exit

R5(config)#Interface loopback 0
R5(config-if)#Ip address 192.168.50.1  255.255.255.0
R5(config-if)#Exit

R1#show ip interface brief
Interface              IP-Address      OK? Method Status                Protocol
FastEthernet0/0        10.1.1.1        YES manual up                    up

Serial4/0              1.1.1.1         YES manual up                    up

Serial4/2              3.3.3.2         YES manual up                    up
Loopback0              192.168.10.1    YES manual up                    up
Loopback1              192.168.11.1    YES manual up                    up
Loopback2              192.168.12.1    YES manual up                    up
Loopback3              192.168.13.1    YES manual up                    up




R2#show ip interface brief
Interface              IP-Address      OK? Method Status                Protocol
FastEthernet0/0        20.1.1.1        YES manual up                    up
Serial4/0              1.1.1.2         YES manual up                    up
Serial4/1              2.2.2.1         YES manual up                    up
Loopback0              192.168.20.1    YES manual up                    up
Loopback1              192.168.21.1    YES manual up                    up
Loopback2              192.168.22.1    YES manual up                    up
Loopback3              192.168.23.1    YES manual up                    up


R3#show ip interface brief
Interface              IP-Address      OK? Method Status                Protocol
FastEthernet0/0        30.1.1.1        YES manual up                    up
Serial4/1              2.2.2.2         YES manual up                    up
Serial4/2              3.3.3.1         YES manual up                    up
Loopback0              192.168.30.1    YES manual up                    up
Loopback1              192.168.31.1    YES manual up                    up
Loopback2              192.168.32.1    YES manual up                    up
Loopback3              192.168.33.1    YES manual up                    up



R4#show ip interface brief
Interface              IP-Address      OK? Method Status                Protocol
FastEthernet0/0        10.1.1.2        YES manual up                    up
Loopback0              192.168.40.1    YES manual up                    up


R5#show ip interface  brief
Interface              IP-Address      OK? Method Status                Protocol
FastEthernet0/0        30.1.1.2        YES manual up                    up
Loopback0              192.168.50.1    YES manual up                    up

R1(config)#router ospf 1
R1(config-router)#network 1.0.0.0 0.255.255.255 area 0
R1(config-router)#network 3.0.0.0 0.255.255.255 area 0
R1(config-router)#network 192.168.10.0 255.0.0.0 area 0
R1(config-router)#network 192.168.11.0 255.0.0.0 area 0
R1(config-router)#network 192.168.12.0 255.0.0.0 area 0
R1(config-router)#network 192.168.13.0 255.0.0.0 area 0
R1(config-router)#end

R2(config)#router ospf 1
R2(config-router)#network 20.0.0.0 0.255.255.255 area 0
R2(config-router)#network 1.0.0.0 0.255.255.255 area 0
R2(config-router)#network 2.0.0.0 0.255.255.255 area 0
R2(config-router)#network 192.168.20.0 255.0.0.0 area 0
R2(config-router)#network 192.168.21.0 255.0.0.0 area 0
R2(config-router)#network 192.168.22.0 255.0.0.0 area 0
R2(config-router)#network 192.168.23.0 255.0.0.0 area 0
R2(config-router)#end


R3(config)#router ospf 1
R3(config-router)#network 2.0.0.0 0.255.255.255 area 0
R3(config-router)#network 3.0.0.0 0.255.255.255 area 0
R3(config-router)#network 192.168.30.0 255.0.0.0 area 0
R3(config-router)#network 192.168.31.0 255.0.0.0 area 0
R3(config-router)#network 192.168.32.0 255.0.0.0 area 0
R3(config-router)#network 192.168.33.0 255.0.0.0 area 0
R3(config-router)#end

R1#show ip route ospf
Codes: L - local, C - connected, S - static, R - RIP, M - mobile, B - BGP
       D - EIGRP, EX - EIGRP external, O - OSPF, IA - OSPF inter area
       N1 - OSPF NSSA external type 1, N2 - OSPF NSSA external type 2
       E1 - OSPF external type 1, E2 - OSPF external type 2
       i - IS-IS, su - IS-IS summary, L1 - IS-IS level-1, L2 - IS-IS level-2
       ia - IS-IS inter area, * - candidate default, U - per-user static route
       o - ODR, P - periodic downloaded static route, H - NHRP, l - LISP
       + - replicated route, % - next hop override


Gateway of last resort is not set

O     2.0.0.0/8 [110/128] via 3.3.3.1, 01:14:38, Serial4/2
                [110/128] via 1.1.1.2, 01:14:38, Serial4/0
O     20.0.0.0/8 [110/65] via 1.1.1.2, 01:14:38, Serial4/0
      192.168.20.0/32 is subnetted, 1 subnets
O        192.168.20.1 [110/65] via 1.1.1.2, 01:14:38, Serial4/0
      192.168.21.0/32 is subnetted, 1 subnets
O        192.168.21.1 [110/65] via 1.1.1.2, 01:14:38, Serial4/0
      192.168.22.0/32 is subnetted, 1 subnets
O        192.168.22.1 [110/65] via 1.1.1.2, 01:14:38, Serial4/0
      192.168.23.0/32 is subnetted, 1 subnets
O        192.168.23.1 [110/65] via 1.1.1.2, 01:14:38, Serial4/0
O     192.168.30.0/24 [110/65] via 3.3.3.1, 01:14:38, Serial4/2
      192.168.31.0/32 is subnetted, 1 subnets
O        192.168.31.1 [110/65] via 3.3.3.1, 01:14:38, Serial4/2
      192.168.32.0/32 is subnetted, 1 subnets
O        192.168.32.1 [110/65] via 3.3.3.1, 01:14:38, Serial4/2
      192.168.33.0/32 is subnetted, 1 subnets
O        192.168.33.1 [110/65] via 3.3.3.1, 01:14:38, Serial4/2



R3#show ip route ospf
Codes: L - local, C - connected, S - static, R - RIP, M - mobile, B - BGP
       D - EIGRP, EX - EIGRP external, O - OSPF, IA - OSPF inter area
       N1 - OSPF NSSA external type 1, N2 - OSPF NSSA external type 2
       E1 - OSPF external type 1, E2 - OSPF external type 2
       i - IS-IS, su - IS-IS summary, L1 - IS-IS level-1, L2 - IS-IS level-2
       ia - IS-IS inter area, * - candidate default, U - per-user static route
       o - ODR, P - periodic downloaded static route, H - NHRP, l - LISP
       + - replicated route, % - next hop override

Gateway of last resort is not set

O     1.0.0.0/8 [110/128] via 3.3.3.2, 01:18:05, Serial4/2
                [110/128] via 2.2.2.1, 01:18:05, Serial4/1
O     20.0.0.0/8 [110/65] via 2.2.2.1, 01:18:05, Serial4/1
O     192.168.10.0/24 [110/65] via 3.3.3.2, 01:18:05, Serial4/2
      192.168.11.0/32 is subnetted, 1 subnets
O        192.168.11.1 [110/65] via 3.3.3.2, 01:18:05, Serial4/2
      192.168.12.0/32 is subnetted, 1 subnets
O        192.168.12.1 [110/65] via 3.3.3.2, 01:18:05, Serial4/2
      192.168.13.0/32 is subnetted, 1 subnets
O        192.168.13.1 [110/65] via 3.3.3.2, 01:18:05, Serial4/2
      192.168.20.0/32 is subnetted, 1 subnets
O        192.168.20.1 [110/65] via 2.2.2.1, 01:18:05, Serial4/1
      192.168.21.0/32 is subnetted, 1 subnets
O        192.168.21.1 [110/65] via 2.2.2.1, 01:18:05, Serial4/1
      192.168.22.0/32 is subnetted, 1 subnets
O        192.168.22.1 [110/65] via 2.2.2.1, 01:18:05, Serial4/1
      192.168.23.0/32 is subnetted, 1 subnets
O        192.168.23.1 [110/65] via 2.2.2.1, 01:18:05, Serial4/1


R1(config)#mpls label protocol ldp
R1(config)#mpls label range 99 199
R1(config)#mpls ldp router-id loopback 0
R1(config)#exit

R1(config)#interface serial 4/0
R1(config-if)#mpls ip
R1(config-if)#exit

R1(config)#interface serial 4/2
R1(config-if)#mpls ip
R1(config-if)#exit



R2(config)#mpls label protocol ldp
R2(config)#mpls label range 200 299
R2(config)#mpls ldp router-id loopback 0
R2(config)#exit

R2(config)#interface serial 4/0
R2(config-if)#mpls ip
R2(config-if)#exit

R2(config)#interface serial 4/1
R2(config-if)#mpls ip
R2(config-if)#exit


R3(config)#mpls label protocol ldp
R3(config)#mpls label range 300 399
R3(config)#mpls ldp router-id loopback 0
R3(config)#exit

R3(config)#interface serial 4/1
R3(config-if)#mpls ip
R3(config-if)#exit


R3(config)#interface serial 4/2
R3(config-if)#mpls ip
R3(config-if)#exit


R1#show mpls ldp neighbor
    Peer LDP Ident: 192.168.20.1:0; Local LDP Ident 192.168.10.1:0
        TCP connection: 192.168.20.1.41723 - 192.168.10.1.646
        State: Oper; Msgs sent/rcvd: 190/188; Downstream
        Up time: 02:23:12
        LDP discovery sources:
          Serial4/0, Src IP addr: 1.1.1.2
        Addresses bound to peer LDP Ident:
          20.1.1.1        1.1.1.2         2.2.2.1         192.168.20.1
          192.168.21.1    192.168.22.1    192.168.23.1
    Peer LDP Ident: 192.168.30.1:0; Local LDP Ident 192.168.10.1:0
        TCP connection: 192.168.30.1.27403 - 192.168.10.1.646
        State: Oper; Msgs sent/rcvd: 186/184; Downstream
        Up time: 02:20:31
        LDP discovery sources:
          Serial4/2, Src IP addr: 3.3.3.1
        Addresses bound to peer LDP Ident:
          2.2.2.2         3.3.3.1         192.168.30.1    192.168.31.1
          192.168.32.1    192.168.33.1



R2#show mpls ldp neighbor
    Peer LDP Ident: 192.168.10.1:0; Local LDP Ident 192.168.20.1:0
        TCP connection: 192.168.10.1.646 - 192.168.20.1.41723
        State: Oper; Msgs sent/rcvd: 189/192; Downstream
        Up time: 02:24:22
        LDP discovery sources:
          Serial4/0, Src IP addr: 1.1.1.1
        Addresses bound to peer LDP Ident:
          1.1.1.1         3.3.3.2         192.168.10.1    192.168.11.1
          192.168.12.1    192.168.13.1
    Peer LDP Ident: 192.168.30.1:0; Local LDP Ident 192.168.20.1:0
        TCP connection: 192.168.30.1.64637 - 192.168.20.1.646
        State: Oper; Msgs sent/rcvd: 187/189; Downstream
        Up time: 02:22:00
        LDP discovery sources:
          Serial4/1, Src IP addr: 2.2.2.2
        Addresses bound to peer LDP Ident:
          2.2.2.2         3.3.3.1         192.168.30.1    192.168.31.1
          192.168.32.1    192.168.33.1


R3#show mpls ldp neighbor
    Peer LDP Ident: 192.168.20.1:0; Local LDP Ident 192.168.30.1:0
        TCP connection: 192.168.20.1.646 - 192.168.30.1.64637
        State: Oper; Msgs sent/rcvd: 190/188; Downstream
        Up time: 02:22:52
        LDP discovery sources:
          Serial4/1, Src IP addr: 2.2.2.1
        Addresses bound to peer LDP Ident:
          20.1.1.1        1.1.1.2         2.2.2.1         192.168.20.1
          192.168.21.1    192.168.22.1    192.168.23.1
    Peer LDP Ident: 192.168.10.1:0; Local LDP Ident 192.168.30.1:0
        TCP connection: 192.168.10.1.646 - 192.168.30.1.27403
        State: Oper; Msgs sent/rcvd: 187/189; Downstream
        Up time: 02:22:33
        LDP discovery sources:
          Serial4/2, Src IP addr: 3.3.3.2
        Addresses bound to peer LDP Ident:
          1.1.1.1         3.3.3.2         192.168.10.1    192.168.11.1
          192.168.12.1    192.168.13.1

R(config)#ip vrf A-1
R1(config-vrf)#rd 500:1
R1(config-vrf)#route-target import 500:1
R1(config-vrf)#route-target export 500:1
R1(config-vrf)#exit


R3(config)#ip vrf A-2
R3(config-vrf)#rd 500:1
R3(config-vrf)#route-target both 500:1
R3(config-vrf)#exit

R1(config)#interface fastethernet 0/0
R1(config-if)#ip vrf forwarding A-1

% Interface FastEthernet0/0 IPv4 disabled and address(es) removed due to enabling VRF A-1

R1(config-if)#ip address 10.1.1.1 255.0.0.0
R1(config-if)#no shutdown
R1(config-if)#exit


R3(config)#interface fastethernet 0/0
R3(config-if)#ip vrf forwarding A-2

% Interface FastEthernet0/0 IPv4 disabled and address(es) removed due to enabling VRF A-2

R3(config-if)#ip address 30.1.1.1 255.0.0.0
R3(config-if)#exit

R1#show run | section vrf
ip vrf A-1
 rd 500:1
 route-target export 500:1
 route-target import 500:1
 ip vrf forwarding A-1


R3#show run | section vrf
ip vrf A-2
 rd 500:1
 route-target export 500:1
 route-target import 500:1
 ip vrf forwarding A-2

R1(config)#interface loopback 0
R1(config-if)# ip ospf network point-to-point
R1(config-if)#end

R3(config)#interface loopback 0
R3(config-if)# ip ospf network point-to-point
R3(config-if)#end


R4(config)#router ospf 1
R4(config-router)#network 192.168.40.0 255.0.0.0 area 0
R4(config-router)#network 10.0.0.0 0.255.255.255 area 0
R4(config-router)#end

R1(config)#router ospf 11 vrf A-1
R1(config-router)#network 10.0.0.0 0.255.255.255 area 0
R1(config-router)#exit

*Mar 20 00:18:20.379: %OSPF-5-ADJCHG: Process 11, Nbr 192.168.40.1 on FastEthernet0/0 from LOADING to FULL, Loading Done



R1#show ip ospf 1 neighbor

Neighbor ID     Pri   State           Dead Time   Address         Interface
192.168.33.1      0   FULL/  -        00:00:33    3.3.3.1         Serial4/2
192.168.23.1      0   FULL/  -        00:00:38    1.1.1.2         Serial4/0
R1#show ip ospf 11 neighbor

Neighbor ID     Pri   State           Dead Time   Address         Interface
192.168.40.1      1   FULL/DR         00:00:33    10.1.1.2        FastEthernet0/0

R1#show ip route vrf A-1 ospf

Routing Table: A-1
Codes: L - local, C - connected, S - static, R - RIP, M - mobile, B - BGP
       D - EIGRP, EX - EIGRP external, O - OSPF, IA - OSPF inter area
       N1 - OSPF NSSA external type 1, N2 - OSPF NSSA external type 2
       E1 - OSPF external type 1, E2 - OSPF external type 2
       i - IS-IS, su - IS-IS summary, L1 - IS-IS level-1, L2 - IS-IS level-2
       ia - IS-IS inter area, * - candidate default, U - per-user static route
       o - ODR, P - periodic downloaded static route, H - NHRP, l - LISP
       + - replicated route, % - next hop override

Gateway of last resort is not set

      192.168.40.0/32 is subnetted, 1 subnets
O        192.168.40.1 [110/2] via 10.1.1.2, 00:01:43, FastEthernet0/0

R1#ping vrf A-1 192.168.40.1
Type escape sequence to abort.
Sending 5, 100-byte ICMP Echos to 192.168.40.1, timeout is 2 seconds:
!!!!!
Success rate is 100 percent (5/5), round-trip min/avg/max = 4/46/100 ms



R5(config)#router ospf 1
R5(config-router)#network 192.168.50.0 255.0.0.0 area 0
R5(config-router)#network 30.0.0.0 0.255.255.255 area 0
R5(config-router)#end



R3(config)#router ospf 13 vrf A-2
R3(config-router)#network 30.0.0.0 0.255.255.255 area 0
R3(config-router)#end

*Mar 20 00:28:16.623: %OSPF-5-ADJCHG: Process 13, Nbr 192.168.50.1 on FastEthernet0/0 from LOADING to FULL, Loading Done




R3#show ip ospf 13 neighbor

Neighbor ID     Pri   State           Dead Time   Address         Interface
192.168.50.1      1   FULL/DR         00:00:33    30.1.1.2        FastEthernet0/0


R3#show ip route vrf A-2 ospf

Routing Table: A-2
Codes: L - local, C - connected, S - static, R - RIP, M - mobile, B - BGP
       D - EIGRP, EX - EIGRP external, O - OSPF, IA - OSPF inter area
       N1 - OSPF NSSA external type 1, N2 - OSPF NSSA external type 2
       E1 - OSPF external type 1, E2 - OSPF external type 2
       i - IS-IS, su - IS-IS summary, L1 - IS-IS level-1, L2 - IS-IS level-2
       ia - IS-IS inter area, * - candidate default, U - per-user static route
       o - ODR, P - periodic downloaded static route, H - NHRP, l - LISP
       + - replicated route, % - next hop override

Gateway of last resort is not set

      192.168.50.0/32 is subnetted, 1 subnets
O        192.168.50.1 [110/2] via 30.1.1.2, 00:01:24, FastEthernet0/0


R1(config)#router bgp 6500
R1(config-router)#no bgp default ipv4-unicast
R1(config-router)#neighbor 192.168.30.1 remote-as 6500
R1(config-router)#neighbor 192.168.30.1 update-source loopback 0
R1(config-router)#address-family vpnv4 unicast
R1(config-router-af)#neighbor 192.168.30.1 activate
R1(config-router-af)#neighbor 192.168.30.1 send-community extended
R1(config-router-af)#neighbor 192.168.30.1 next-hop-self
R1(config-router-af)#end


R3(config)#router bgp 6500
R3(config-router)#no bgp default ipv4-unicast
R3(config-router)#neighbor 192.168.10.1 remote-as 6500
R3(config-router)#neighbor 192.168.10.1 update-source loopback 0
R3(config-router)#address-family vpnv4 unicast
R3(config-router-af)#neighbor 192.168.10.1 activate
R3(config-router-af)#neighbor 192.168.10.1 send-community extended
R3(config-router-af)#neighbor 192.168.10.1 next-hop-self
R3(config-router-af)#end

*Mar 20 00:59:36.259: %BGP-5-ADJCHANGE: neighbor 192.168.10.1 Up



R1(config)#router bgp 6500
R1(config-router)#address-family ipv4 vrf A-1
R1(config-router-af)#redistribute ospf 11 vrf A-1 match ?
  external       Redistribute OSPF external routes
  internal       Redistribute OSPF internal routes
  nssa-external  Redistribute OSPF NSSA external routes

R1(config-router-af)#redistribute ospf 11 vrf A-1 match internal ?
  external       Redistribute OSPF external routes
  metric         Metric for redistributed routes
  nssa-external  Redistribute OSPF NSSA external routes
  route-map      Route map reference
  <cr>

R1(config-router-af)#redistribute ospf 11 vrf A-1 match internal external ?
  1              Redistribute external type 1 routes
  2              Redistribute external type 2 routes
  metric         Metric for redistributed routes
  nssa-external  Redistribute OSPF NSSA external routes
  route-map      Route map reference
  <cr>

R1(config-router-af)#$e ospf 11 vrf A-1 match internal external 1 external 2
R1(config-router-af)#end


R1(config)#router ospf 11 vrf A-1
R1(config-router)#redistribute bgp 6500 subnets
R1(config-router)#end


R3(config)#router bgp 6500
R3(config-router)#address-family ipv4 vrf A-2
R3(config-router-af)#$e ospf 13 vrf A-2 match internal external 1 external 2
R3(config-router-af)#end

(R3(config-router-af)#redistribute ospf 13 vrf A-2 match internal external 1 external 2)


R3(config)#router ospf 13 vrf A-2
R3(config-router)#redistribute bgp 6500 subnets

R3(config-router)#end


R1#show ip bgp vpnv4 all
BGP table version is 7, local router ID is 192.168.13.1
Status codes: s suppressed, d damped, h history, * valid, > best, i - internal,
              r RIB-failure, S Stale, m multipath, b backup-path, f RT-Filter,
              x best-external, a additional-path, c RIB-compressed,
Origin codes: i - IGP, e - EGP, ? - incomplete
RPKI validation codes: V valid, I invalid, N Not found


     Network          Next Hop            Metric LocPrf Weight Path
Route Distinguisher: 500:1 (default for vrf A-1)
 *>  10.0.0.0         0.0.0.0                  0         32768 ?
 *>i 30.0.0.0         192.168.30.1             0    100      0 ?
 *>  192.168.40.1/32  10.1.1.2                 2         32768 ?
 *>i 192.168.50.1/32  192.168.30.1             2    100      0 ?

R1#show ip route vrf A-1

Routing Table: A-1
Codes: L - local, C - connected, S - static, R - RIP, M - mobile, B - BGP
       D - EIGRP, EX - EIGRP external, O - OSPF, IA - OSPF inter area
       N1 - OSPF NSSA external type 1, N2 - OSPF NSSA external type 2
       E1 - OSPF external type 1, E2 - OSPF external type 2
       i - IS-IS, su - IS-IS summary, L1 - IS-IS level-1, L2 - IS-IS level-2
       ia - IS-IS inter area, * - candidate default, U - per-user static route
       o - ODR, P - periodic downloaded static route, H - NHRP, l - LISP
       + - replicated route, % - next hop override

Gateway of last resort is not set

      10.0.0.0/8 is variably subnetted, 2 subnets, 2 masks
C        10.0.0.0/8 is directly connected, FastEthernet0/0
L        10.1.1.1/32 is directly connected, FastEthernet0/0
B     30.0.0.0/8 [200/0] via 192.168.30.1, 00:05:57
      192.168.40.0/32 is subnetted, 1 subnets
O        192.168.40.1 [110/2] via 10.1.1.2, 00:40:55, FastEthernet0/0
      192.168.50.0/32 is subnetted, 1 subnets
B        192.168.50.1 [200/2] via 192.168.30.1, 00:05:57

R1#show ip route vrf A-1 bgp

Routing Table: A-1
Codes: L - local, C - connected, S - static, R - RIP, M - mobile, B - BGP
       D - EIGRP, EX - EIGRP external, O - OSPF, IA - OSPF inter area
       N1 - OSPF NSSA external type 1, N2 - OSPF NSSA external type 2
       E1 - OSPF external type 1, E2 - OSPF external type 2
       i - IS-IS, su - IS-IS summary, L1 - IS-IS level-1, L2 - IS-IS level-2
       ia - IS-IS inter area, * - candidate default, U - per-user static route
       o - ODR, P - periodic downloaded static route, H - NHRP, l - LISP
       + - replicated route, % - next hop override

Gateway of last resort is not set

B     30.0.0.0/8 [200/0] via 192.168.30.1, 00:06:24
      192.168.50.0/32 is subnetted, 1 subnets
B        192.168.50.1 [200/2] via 192.168.30.1, 00:06:24

R1#ping vrf A-1 192.168.40.1
Type escape sequence to abort.
Sending 5, 100-byte ICMP Echos to 192.168.40.1, timeout is 2 seconds:
!!!!!
Success rate is 100 percent (5/5), round-trip min/avg/max = 44/72/104 ms

R1#ping vrf A-1 192.168.50.1
Type escape sequence to abort.
Sending 5, 100-byte ICMP Echos to 192.168.50.1, timeout is 2 seconds:
!!!!!
Success rate is 100 percent (5/5), round-trip min/avg/max = 104/144/248 ms




R3#show ip bgp vpnv4 all
BGP table version is 7, local router ID is 192.168.33.1
Status codes: s suppressed, d damped, h history, * valid, > best, i - internal,
              r RIB-failure, S Stale, m multipath, b backup-path, f RT-Filter,
              x best-external, a additional-path, c RIB-compressed,
Origin codes: i - IGP, e - EGP, ? - incomplete
RPKI validation codes: V valid, I invalid, N Not found

     Network          Next Hop            Metric LocPrf Weight Path
Route Distinguisher: 500:1 (default for vrf A-2)
 *>i 10.0.0.0         192.168.10.1             0    100      0 ?
 *>  30.0.0.0         0.0.0.0                  0         32768 ?
 *>i 192.168.40.1/32  192.168.10.1             2    100      0 ?
 *>  192.168.50.1/32  30.1.1.2                 2         32768 ?


R3#show ip route vrf A-2

Routing Table: A-2
Codes: L - local, C - connected, S - static, R - RIP, M - mobile, B - BGP
       D - EIGRP, EX - EIGRP external, O - OSPF, IA - OSPF inter area
       N1 - OSPF NSSA external type 1, N2 - OSPF NSSA external type 2
       E1 - OSPF external type 1, E2 - OSPF external type 2
       i - IS-IS, su - IS-IS summary, L1 - IS-IS level-1, L2 - IS-IS level-2
       ia - IS-IS inter area, * - candidate default, U - per-user static route
       o - ODR, P - periodic downloaded static route, H - NHRP, l - LISP
       + - replicated route, % - next hop override

Gateway of last resort is not set

B     10.0.0.0/8 [200/0] via 192.168.10.1, 00:14:56
      30.0.0.0/8 is variably subnetted, 2 subnets, 2 masks
C        30.0.0.0/8 is directly connected, FastEthernet0/0
L        30.1.1.1/32 is directly connected, FastEthernet0/0
      192.168.40.0/32 is subnetted, 1 subnets
B        192.168.40.1 [200/2] via 192.168.10.1, 00:14:56
      192.168.50.0/32 is subnetted, 1 subnets
O        192.168.50.1 [110/2] via 30.1.1.2, 00:22:01, FastEthernet0/0

R3#show ip route vrf A-2 BGP

Routing Table: A-2
Codes: L - local, C - connected, S - static, R - RIP, M - mobile, B - BGP
       D - EIGRP, EX - EIGRP external, O - OSPF, IA - OSPF inter area
       N1 - OSPF NSSA external type 1, N2 - OSPF NSSA external type 2
       E1 - OSPF external type 1, E2 - OSPF external type 2
       i - IS-IS, su - IS-IS summary, L1 - IS-IS level-1, L2 - IS-IS level-2
       ia - IS-IS inter area, * - candidate default, U - per-user static route
       o - ODR, P - periodic downloaded static route, H - NHRP, l - LISP
       + - replicated route, % - next hop override

Gateway of last resort is not set

B     10.0.0.0/8 [200/0] via 192.168.10.1, 00:15:15
      192.168.40.0/32 is subnetted, 1 subnets
B        192.168.40.1 [200/2] via 192.168.10.1, 00:15:15



R3#ping vrf A-2 192.168.50.1
Type escape sequence to abort.
Sending 5, 100-byte ICMP Echos to 192.168.50.1, timeout is 2 seconds:
!!!!!
Success rate is 100 percent (5/5), round-trip min/avg/max = 44/76/132 ms

R3#ping vrf A-2 192.168.40.1
Type escape sequence to abort.
Sending 5, 100-byte ICMP Echos to 192.168.40.1, timeout is 2 seconds:
!!!!!
Success rate is 100 percent (5/5), round-trip min/avg/max = 68/108/152 ms

R4#ping 192.168.50.1 source 192.168.40.1
Type escape sequence to abort.
Sending 5, 100-byte ICMP Echos to 192.168.50.1, timeout is 2 seconds:
Packet sent with a source address of 192.168.40.1
!!!!!
Success rate is 100 percent (5/5), round-trip min/avg/max = 156/186/228 ms


R4#traceroute 192.168.50.1
Type escape sequence to abort.
Tracing the route to 192.168.50.1
VRF info: (vrf in name/id, vrf out name/id)
  1 10.1.1.1 108 msec 56 msec 104 msec
  2 30.1.1.1 [MPLS: Label 308 Exp 0] 84 msec 104 msec 104 msec
  3 30.1.1.2 172 msec 148 msec 128 msec

R5#ping 192.168.40.1 source 192.168.50.1
Type escape sequence to abort.
Sending 5, 100-byte ICMP Echos to 192.168.40.1, timeout is 2 seconds:
Packet sent with a source address of 192.168.50.1
!!!!!
Success rate is 100 percent (5/5), round-trip min/avg/max = 140/156/180 ms

R5#traceroute 192.168.40.1
Type escape sequence to abort.
Tracing the route to 192.168.40.1
VRF info: (vrf in name/id, vrf out name/id)
  1 30.1.1.1 36 msec 76 msec 56 msec
  2 10.1.1.1 [MPLS: Label 104 Exp 0] 180 msec 168 msec 56 msec
  3 10.1.1.2 180 msec 172 msec 228 msec


R4#show ip route ospf
Codes: L - local, C - connected, S - static, R - RIP, M - mobile, B - BGP
       D - EIGRP, EX - EIGRP external, O - OSPF, IA - OSPF inter area
       N1 - OSPF NSSA external type 1, N2 - OSPF NSSA external type 2
       E1 - OSPF external type 1, E2 - OSPF external type 2
       i - IS-IS, su - IS-IS summary, L1 - IS-IS level-1, L2 - IS-IS level-2
       ia - IS-IS inter area, * - candidate default, U - per-user static route
       o - ODR, P - periodic downloaded static route, H - NHRP, l - LISP
       + - replicated route, % - next hop override

Gateway of last resort is not set

O E2  30.0.0.0/8 [110/1] via 10.1.1.1, 00:15:14, FastEthernet0/0
      192.168.50.0/32 is subnetted, 1 subnets
O E2     192.168.50.1 [110/2] via 10.1.1.1, 00:15:14, FastEthernet0/0


R5#show ip route ospf
Codes: L - local, C - connected, S - static, R - RIP, M - mobile, B - BGP
       D - EIGRP, EX - EIGRP external, O - OSPF, IA - OSPF inter area
       N1 - OSPF NSSA external type 1, N2 - OSPF NSSA external type 2
       E1 - OSPF external type 1, E2 - OSPF external type 2
       i - IS-IS, su - IS-IS summary, L1 - IS-IS level-1, L2 - IS-IS level-2
       ia - IS-IS inter area, * - candidate default, U - per-user static route
       o - ODR, P - periodic downloaded static route, H - NHRP, l - LISP
       + - replicated route, % - next hop override

Gateway of last resort is not set


O E2  10.0.0.0/8 [110/1] via 30.1.1.1, 00:12:07, FastEthernet0/0
      192.168.40.0/32 is subnetted, 1 subnets
O E2     192.168.40.1 [110/2] via 30.1.1.1, 00:12:07, FastEthernet0/0


Internetworks

Author & Editor

I am CCIE Technical Instructor/Network consultant. i am having experience of ranging from operating and maintaining PCs and peripherals to network control programs for multi-faceted data communication networks in LAN,MAN, and WAN environments.

0 comments: